Allied Telesis SwitchBlade x3100 Series Manual page 673

Configuring Port Authentication
DISABLE DOT1X INTERFACE
Syntax
DISABLE DOT1X INTERFACE={ type:id-range | id-range | ifname-list |
ALL }
This command disables 802.1X Port Authentication on the interface specified. Note that
Description
once an interface is enabled its settings are maintained, even if all interfaces are disabled
system-wide using
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
Example
DISABLE DOT1X INTERFACE
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
.
DISABLE DOT1X
Description
The ethernet interfaces over which the 802.1X feature
will be disabled.
=6.22-6.23
Introduction
Default Value
N/A
6-113