Introduction
TABLE 1-10
Step
Command
Verify that the UTC offset changed
SHOW SYSTEM TIME FULL
8
--- System Time ---
Date.................................... 2009-12-07
Time.................................... 13:21:55 (STANDARD)
Current UTC Offset................. -01:00:00
Day Light Saving
Status................................
Timezone..............................
Start.................................
End...................................
DST UTC Offset........................
Standard UTC Offset................ -01:00:00 <- HERE
SNTP Settings
Status................................
The following procedure shows the commands used for deleting an SNTP server.
TABLE 1-11
Step
Command
Review the SNTP settings
SHOW SNTP
1
--------------------------------------------------------------------
SNTP Configuration
--------------------------------------------------------------------
Status
Local IP
Last Update
Last Delta
Last Status
SNTP Server
--------------------------------------------------------------------
192.43.244.18
SNTP Statistics
--------------------------------------------------------------------
Requests Sent
Responses Received
Disable the SNTP
DISABLE SNTP
2
Delete the SNTP server
1-74
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Configuration Procedure for SNTP
OFF
CUSTOM
-
-
+00:00:00
ON
Configuration Procedure for SNTP - Deleting SNTP Server
On
10.52.70.14
2009-12-07 09:18:46
+00.12s
Operation Successful
1
1
Description (Optional)
Description (Optional)
Deactivates the SNTP so that the SBx3112 will no
longer synchronize its clock with the SNTP clock.
Configuring SNTP