Allied Telesis SwitchBlade x3100 Series Manual page 376

Introduction
DESTROY VLAN
Destroys the specified Virtual LAN (VLAN) or all VLANs in the switch. The default
Description
VLAN (VID=1) cannot be destroyed. If ALL is specified then all VLANs except the
default VLAN are destroyed. A VLAN cannot be destroyed if interfaces still belong to it.
Syntax
DESTROY VLAN={ vlanname-list | vid-range
The following table gives the range of values for each option that can be specified with
Options
this command and a Default Value (if applicable).
Example
DESTROY VLAN=4004
4-56
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Option Description
VLAN A comma-delimited list of VLAN names or VLAN
number range (e.g., 4-6).
Configuring Standard VLANs
| ALL }
Default Value