Allied Telesis SwitchBlade x3100 Series Manual page 268

Introduction
CREATE PROFILE
Syntax
CREATE PROFILE=name cardtype [ PREFLOAD=filename ] [ ADMINSTATE={
UP | DOWN } ]
Creates a profile for the specified card type. Attributes required are usually the PREF-
Description
LOAD and ADMINSTATE.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
CREATE PROFILE=GOLD GEPORT FLOWCONTROL=ON
1-238
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Option Description
PROFILE A profile contains a set of pre-defined provisioning
attributes. The contents of a profile can be displayed
(SHOW PROFILE) and changed (SET PROFILE).
card_type The type of card. For the SBx3112, the allowed card
types are GE24POE, GE24SFP, and XE4.
PREFLOAD Specifies the name of the preferred software load file for
the card. This file must reside on the CFC flash file sys-
tem, and is loaded to the flash memory on the card (if
it's not already there) when the card is enabled or reset.
The command is rejected if the preferred software load
specified is not compatible with the specified card.
ADMIN- The initial administrative state for the card. The adminis-
STATE trative state reflects the user's intent on having the card
available for service (ready to process data).
XE4 Card Attributes
Default Value
N/A