Allied Telesis SwitchBlade x3100 Series Manual page 729

Configuring Local ARP Discard
ADD MACFF GROUP HOST INTERFACE
Syntax
ADD MACFF GROUP=groupname HOST={ ipaddress-list } INTERFACE={
type:id-range | id-range | ifname-list | ALL }
Adds the specified (i.e. static) host addresses on the specified interfaces to (only) one
Description
Group. If a static host IP address is subsequently discovered (DHCP), its type changes to
BOTH.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
GROUP
HOST
INTERFACE
ALL
Example
ADD MACFF GROUP=A HOST=1.1.50.1,1.1.50.5,1.1.50.10 INTERFACE=11.0
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
Adds the group name to the interface
IP address(es) that will make up the group
All interfaces that have statically configured hosts in the
Group are added to the group.
Introduction
Default Value
6-169