Allied Telesis SwitchBlade x3100 Series Manual page 483

EPSR and (R)STP Interaction
SHOW EPSR
Used to display the information about the EPSR domains. SHOW EPSR and SHOW EPSR
Description
ALL command displays the summary information about all the provisioned EPSR domains
in the system. The SHOW EPSR epsrdomain command displays the detailed information
about that specific EPSR domain.
Syntax
SHOW EPSR [ ={ epsrdomain-list | ALL } ] [ { FULL | DATAVLANS } ]
The following table gives the range of values for each option that can be specified with
Options
this command and a Default Value (if applicable).
Option
EPSR
FULL
DATAVLANS
Example
SHOW EPSR
--- EPSR Domain Information ---
Data
Node
EPSR Domain Type
----------- ------- ------------ ------ ------------------------------- ------
e163 Master
test Master
videoring Master
e164 Transit EN/LINKS-UP
E135 - manager SEC>> sh epsr=videoring
--- EPSR Domain Information ---
EPSR Domain Name...................... videoring
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Description
The name(s) that have been given to the EPSR
domain(s).
Provides information on both CONTROL and
DATA VLANS
Lists the DATA VLAN(s) for the domain(s)
Ctrl
Domain State Vlan
EN/COMPLETE 4
DIS/IDLE -
EN/COMPLETE 6
5
Interface(s) (Phy. State, Type, Vlan
State, Prio)Count
8.18 (UP,DNSTRM,PHYFWD,0(0)),
8.19 (UP,DNSTRM,PHYBLK,0(0))
-
11.0 (UP,DNSTRM,PHYFWD,0(0)),
8.22 (UP,DNSTRM,PHYBLK,0(0))
8.18 (UP,DNSTRM,PHYFWD,0(0)),
8.19 (UP,UPSTRM,PHYFWD,0(0))
Introduction
Default Value
ALL
19
0
1
1
4-163