Allied Telesis SwitchBlade x3100 Series Manual page 270

Introduction
DESTROY PROFILE
Syntax
DESTROY PROFILE=name cardtype
Destroys a profile for the specified card type. No other attributes are required. Any
Description
managed entity that had a Profile applied is set to (no profile association).
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
DESTROY PROFILE=GOLD GEPORT
Example
1-240
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Option Description
card_type The type of card. For the SBx3112, the allowed card
types are GE24POE, GE24SFP, and XE4.
XE4 Card Attributes
Default Value
N/A