Allied Telesis SwitchBlade x3100 Series Manual page 766

Introduction
CREATE DHCPRELAY
Syntax
CREATE DHCPRELAY=dhcpname [ AGENT REMOTEID={ remote-id | SHELFID |
IFDESCRIPTION | IFREMOTEID | DEFAULT } ] [ SHELFID={ shelf-id |
DEFAULT } ] [ MODE={ RELAY | SNOOPING } ] [ SERVER={ ipaddress-list
| NONE } ] [ VLAN={ vlanname-list | vid-range | ALL } ] [ CIDFOR-
MAT={ AUTO | TR101DEFAULT } ]
Creates a DHCP Relay instance and its attributes. Can associate with a VLAN ID. The
Description
command can accommodate TR101 and non-TR101 formats. DHCP Relay or DHCP
Snooping is controlled with the MODE parameter. The AGENT, MODE, SERVER, and
VLAN attributes can be defined with the SET DCHPRELAY INSTANCE command as
well. In release 10.0, both binary and text formats (TR-101) are supported.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
7-28
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Option Description
DHCPRELAY dhcpname - the name of the DHCP instance
AGENT remote-id - the DHCP Relay agent's remote ID, which is
REMOTEID used DHCP servers to identify the relay agent.
SHELFID - the shelf identifier for the DHCP relay agent.
IFDESCRIPTION - interface description
IFREMOTEID - interface remote ID
DEFAULT - Shelf MAC
SHELFID shelf-id - the user-specified shelf identifier for the DHCP
relay agent
DEFAULT - Shelf MAC
MODE RELAY - indicates the relay agent is in relay mode
SNOOPING - indicates the relay agent is in snooping
mode; the relay agent updates the option 82 portion of
client messages without forwarding to DHCP servers
SERVER ipaddress-list - the list of IP addresses being sent to the
DCHP server by the relay agent separated by a comma
NONE -
VLAN vlanname-list - list of specific VLAN(s) separated by a
comma
vid-range - VLAN range of IDs
ALL - all VLANs
Configuring DHCP Relay
Default Value
DEFAULT
DEFAULT
RELAY
None
None