Allied Telesis SwitchBlade x3100 Series Manual page 550

Introduction
DISABLE IGMPSNOOPING
Syntax
DISABLE IGMPSNOOPING [ INTERFACE={ type:id-range | id-range |
ifname-list | ALL } ]
Used to disable the snooping feature and not intercept and monitor the IGMP protocol
Description
messages. This command is used to disable the IGMP system-wide and also on port or
interface basis.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
ALL
Example
DISABLE IGMPSNOOPING INTERFACE=1.23
5-18
Software Reference for SwitchBlade x3100 Series Switches (Internet Group Management
Protocol (IGMP))
Description
Disable all interfaces (and therefore the system)
Configuring IGMP
Default Value