Allied Telesis SwitchBlade x3100 Series Manual page 83

Password Recovery
SETDEFAULTS LOGIN BANNER (SEC)
Syntax
SETDEFAULTS LOGINBANNER
[ { USER | MANAGER | SECURITYOFFICER | ALL } ]
Used to restore the login banner back to its default settings for the requested user privi-
Description
lege level. The default loginbanner for each of the user privilege levels is an empty string
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
Security Level
Example
SETDEFAULTS LOGINBANNER
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Description
The level in which the default banner is set. If ALL
parameter is provided, all user levels are reset to
the default loginbanner.
Introduction
Default Value
ALL
1-53