Allied Telesis SwitchBlade x3100 Series Manual page 870

Introduction
SETDEFAULTS BFD INTERFACE
Syntax
SETDEFAULTS BFD INTERFACE={ type:id-range | id-range | ifname-list
| ALL } [ INTERVAL ] [ DETECTIONMULTIPLIER ]
Restores on an interface the default interval and multiplier values
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
SETDEFAULTS BFD INTERFACE=
7-132
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Option Description
INTERFACE The interfaces where the BFD default values will be set.
INTERVAL Specifies the desired interval in milliseconds between
transmitted packets
DETEC- The number of consecutive missed packets required to
TIONMULTI- declare a failure.
PLIER
8.18,8.19
Configuring BFD
Default Value
200ms
3