Allied Telesis SwitchBlade x3100 Series Manual page 517

Configuring VLAN Based HVLAN
ADD VLANTUNNELMAP VLAN HVLAN
Syntax
ADD VLANTUNNELMAP VLAN={ vlanname-list | vid-range } HVLAN={ hvlan-
name | vid }
Makes the association of the VLAN to a VLAN-based HVLAN tunnel. The tunnel is
Description
defined by the HVLAN and its interface membership.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
VLAN
HVLAN
Example
ADD VLANTUNNELMAP VLAN=VOICE HVLAN=S_300
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Description
The list of provisioned VLAN names, separated by a
comma, or the range of provisioned VLAN IDs that are
to be mapped to the HVLAN tunnel
The HVLAN name or id that represents the tunnel.
Introduction
Default Value
N/A
N/A
4-197