Introduction
SET SYSTEM ECOMODE
Syntax
SET SYSTEM ECOMODE={ ON | OFF }
The SBx3112-00 has a "green" energy savings mode called ECOMODE that is activated
Description
by the user either via a front-panel ECO mode switch or by this CLI command. While
ECO mode is on, the system removes power to all LEDs on the CFCs (except for the
master/slave LED) and all port LEDs on the service modules.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
SET SYSTEM ECOMODE=ON
1-190
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Option
Description
ECOMODE
Toggles ECOMODE as either ON or OFF
ECO Functions and Lamp Test
Default Value
OFF