Allied Telesis SwitchBlade x3100 Series Manual page 574

Introduction
Info (010017): Operation Successful
officer SEC>> SHOW CLASSIFIER=IPFILT1
--- Classifier Configuration Data ---------------------------------------------
Name Field Match(es)
------------------- -------------------------------------- -------------------
ipfilt1
-------------------------------------------------------------------------------
Now, set a PROTOCOL filter on the classifier.
officer SEC>> SET CLASSIFIER=ipfilt1 PROTOCOL=IPV4
Info (010017): Operation Successful
officer SEC>> SHOW CLASSIFIER=IPFILT1
--- Classifier Configuration Data ---------------------------------------------
Name Field Match(es)
------------------- -------------------------------------- -------------------
ipfilt1
-------------------------------------------------------------------------------
Set a IPDEST filter.
officer SEC>> SET CLASSIFIER=ipfilt1 IPDEST=10.0.0.0/8
Info (010017): Operation Successful
officer SEC>> SHOW CLASSIFIER=IPFILT1
--- Classifier Configuration Data ---------------------------------------------
Name Field Match(es)
------------------- -------------------------------------- -------------------
ipfilt1
------------------------------------------------------------------------------
Using the
SETDEFAULTS
officer SEC>> SETDEFAULTS CLASSIFIER=IPFILT1 IPDEST
Info (010017): Operation Successful
officer SEC>> SHOW CLASSIFIER=IPFILT1
--- Classifier Configuration Data ---------------------------------------------
Name Field Match(es)
------------------- -------------------------------------- -------------------
ipfilt1
6-14
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
IPSOURCE= 172.16.5.0/
28
PROTOCOL= IPV4
IPSOURCE= 172.16.5.0/
28
PROTOCOL= IPV4
IPSOURCE= 172.16.5.0/
28
IPDEST= 10.0.0.0/8
command, set the IPDEST back to it's default value.
PROTOCOL= IPV4
IPSOURCE= 172.16.5.0/
2
Classifier Management
Action(s)
DROP
Action(s)
DROP
Action(s)
DROP
Action(s)
DROP