Setdefaults Lldp Interface - Allied Telesis SwitchBlade x3100 Series Manual

Configuring LLDP

SETDEFAULTS LLDP INTERFACE

Syntax
SETDEFAULTS LLDP INTERFACE={ type:id-range | id-range | ifname-list
| ALL } [ MODE ] [ NOTIFY ]
Controls the default settings for LLDP for the specified interface(s).
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
MODE
NOTIFY
Example
SETDEFAULTS LLDP INTERFACE=
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Description
A logical representation of one or more physical ports;
the INTERFACE for which RMON data is enabled
type:id-range - the type of available ports, such as
ETH:7.0 or a range (ETH:8.0-8.9)
id-range - used with type (type:id) to query the physical
ports; the numerical identifier of the interface
ifname-list - list of interface names, if not numerical
ALL - used to specify the same historical data collection
parameters on all applicable interfaces in the system
Refer to Table 7-10.
Refer to Table 7-10.
ALL MODE
Introduction
Default Value
OFF
OFF
7-89