Allied Telesis SwitchBlade x3100 Series Manual page 866

Introduction
DELETE BFD INTERFACE
Syntax
DELETE BFD INTERFACE={ type:id-range | id-range | ifname-list | ALL
} [ FORCE ]
Deletes the BFD feature for the selected interfaces
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
DELETE
7-128
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Option Description
INTERFACE The interface where BFD will be deleted
FORCE Overrides the confirmation message that command
could impact service if the remote peer is enabled.
BFD INTERFACE=8.18,8.19
Configuring BFD
Default Value
200ms