Allied Telesis SwitchBlade x3100 Series Manual page 309

Configuration Guidelines
TABLE 3-3
Step Command
Set the priorities on the ports with Class 4 devices.
SET POE INTERFACE=0.0-0.14, 1.0-1.14
2
PRIORITY=CRITICAL
Set the power limit on the Class 4 devices in slot 1.
SET POE INTERFACE=1.0-1.14 POWER-
3
LIMIT=2200MW
Set the PoE threshold for the shelf.
SET POE THRESHOLD=80
4
Show the current status of the ports on the selected interface.
SHOW POE INTERFACE=0.*, 1.*
5
Software Reference for SwitchBlade x3100 Series Switches (Power over Ethernet (PoE))
Configuration procedure for PoE
Configuring the GE24POE Card
Description
Changes the priority of the ports from LOW to
CRITICAL for ports on slot 0 and slot 1.
Modifies the power limit on ports 1.0-1.14 to a
maximum of 22W.
Monitors the power usage on the shelf by sending
an alarm when the threshold is exceeded.
Displays the current configuration of the ports.
3-7