Allied Telesis SwitchBlade x3100 Series Manual page 421

Configuring BPDU Cop
DELETE TRACE STP
Syntax
DELETE TRACE STP [ INSTANCE={ stpname | mstid | MAIN | ALL } ] [
EVENT={ BPDU | ALL } ] [ INTERFACE={ type:id-range | id-range |
ifname-list | ALL } ]
Removes specified trace criteria for STP traces.
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a Default Value (if applicable).
Option
INSTANCE
EVENT
INTERFACE
Example
DELETE TRACE STP INSTANCE 2
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Description
The instance form which the trace will be deleted.
All events or BPDUs
The interface(s) where the trace will be removed.
Introduction
Default Value
N/A
0.0.0.0
If no IP address is
supplied, the natu-
ral mask of the IP
address is used.
4-101