Allied Telesis SwitchBlade x3100 Series Manual page 137

CFC Media (SD Card)
SHOW FILES
Syntax
SHOW FILES [ ={ filename-pattern | unit: | unit:filename-pattern }
] [ FULL ]
Displays all user manageable files that exist on the CFC flash file system. Examples of
Description
manageable files include software load files and script files. There are other types of files
that are not directly manageable by the user that exist on the CFC flash file system, but
are hidden and not displayed by this command. Database and log files are examples of files
that are not directly user manageable. The information is displayed in a columnar format,
and for each file the following is shown:
•
•
Additional general information is shown about the CFC flash file system, including:
•
•
•
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
FILES
FULL
Example
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
the name of the file
the size of the file in kilobytes
the total amount of space (in kilobytes) allocated for user manageable files
the total amount of space (in kilobytes) currently in use for user manageable files
the total amount of free space (in kilobytes) available for additional user manageable
files.
Description
Used to select the
filename-pattern - A set of files using wildcards.
unit - The CD unit (SD4 or SD5)
unit:filename-pattern - the specific SD unit
and the pattern (in 14.1, only the SD unit on the active
CFC unit can be specified)
When the FULL option is specified, extra information
about each file is shown:
- the version of the file if it is a software load file; for
other types of files this field is left blank
- the hardware model number supported by this file if it
is a software load file; for other types of files this field is
left blank
- the date and time that the file was last modified
Introduction
Default Value
All files on the
CFC flash file sys-
tem.
1-107