Allied Telesis SwitchBlade x3100 Series Manual page 290

GE Interfaces
DISABLE INTERFACE
Syntax
DISABLE INTERFACE={ type:id-range | id-range | ifname-list } [
FORCE ]
This command should be used with caution. Places the interface(s) in the DOWN
Description
administrative state. FORCE will do this even is the interface is operationally UP.
Disabling the GE24POE interface has no effect on the port's ability to provide power.
Note:
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
DISABLE INTERFACE=1.2 FORCE
Info (039512): Operation Successful (XE4 Slot 1 Port 2)
2-10
Software Reference for SwitchBlade x3100 Series Switches (Interface Management)
Option Description
INTERFACE The INTERFACE parameter allows the filtering of inter-
faces. Interfaces to be displayed may be selected by type
or a type:id/name list (e.g., ETH:4.4-4.8/name1,name2)
FORCE Will disable the interface even if it is operationally UP.
Example Output
Default Value
ALL