Allied Telesis SwitchBlade x3100 Series Manual page 587

Configuring Classifiers
RESET CLASSIFIER COUNTER INTERFACE
Syntax
RESET CLASSIFIER COUNTER
INTERFACE={type:id-range|id-range|ifname-list|ALL}
[FORCE]
Resets (sets to 0) all CLASSIFIER counters associated with the specified INTERFACE(s).
Description
There are 3 pre-defined CLASSIFIER counters for each INTERFACE, as described in
"SHOW CLASSIFIER INTERFACE COUNTER".
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
FORCE
Example
RESET CLASSIFIER COUNTER INTERFACE
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
The interface where the counters are reset
Resets the classifier without confirmation
=1.23 FORCE
Introduction
Default Value
6-27