Allied Telesis SwitchBlade x3100 Series Manual page 509

Configuring Port Based HVLAN
TABLE 4-28
Step Command
Set the TAGALL parameter to OFF.
SET INTERFACE=2.0,2.1 TAGALL=OFF
1
Delete ALL the interfaces from the HVLANs
DELETE HVLAN=H_100
2
INTERFACE=0.1,0.2,2.0,2.1
Destroy the HVLANs
DESTROY HVLAN=H_100
3
Set the TPID values back to 0x8100
SET INTERFACE=0.1,0.2 TPID=0x8100
4
Enable IGMP and DHCP on the Customer interfaces (optional)
ENABLE IGMP INTERFACE=2.0,2.1
5
ENABLE DHCP ALL INTERFACE=2.0,2.1
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Configuration to Deprovision a Port Based HVLAN
Description
You must set TAGALL=OFF for the customer
interfaces before you can delete the interface
from the HVLAN.
Introduction
4-189