Allied Telesis SwitchBlade x3100 Series Manual page 761

Configuring DHCP Relay
ADD DHCPRELAY VLAN
Syntax
ADD DHCPRELAY={ dhcpname | MAIN } VLAN={ vlanname-list | vid-range
| ALL }
Adds a VLAN (or set of VLANs) to the DHCPRELAY instance.
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
DHCPRELAY
VLAN
Example
ADD DHCPRELAY=X3112 VLAN=420
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Description
The name of the DHCP instance
dhcpname-list - list of specific DHCP instances
MAIN - the default DHCP instance
The name or numerical VLAN identifier being added to
the DHCP relay instance.
vlanname-list - list of specific VLAN(s) separated by a
comma
vid-range - VLAN range of IDs
ALL - all VLANs
Introduction
Default Value
N/A
N/A
7-23