Allied Telesis SwitchBlade x3100 Series Manual page 464

Introduction
TABLE 4-19
Step Command
Review full configuration information for each EPSR domain
show epsr full
22
--- EPSR Domain Information ---
EPSR Domain Name...................... allied-1
EPSR Domain Node Type................. Transit
EPSR Domain State..................... LINKS-UP
MAC Address of Master Node............ 00:15:77:F5:68:61
EPSR Domain Status.................... Enabled
Control Vlan.......................... 200
Enhanced Recovery..................... ON
Ring Interface # 1.................... ETH:[8.2]
Physical State of Ring Interface # 1.. UP
Ring Interface # 1 Type............... DOWNSTREAM
Ring Interface # 1 State.............. PHYSICALLY FORWARDING
Ring Interface # 1 Priority........... 0
Ring Interface # 1 Priority Rank...... 0
Ring Interface # 2.................... ETH:[3.2]
Physical State of Ring Interface # 2.. UP
Ring Interface # 2 Type............... UPSTREAM
Ring Interface # 2 State.............. PHYSICALLY FORWARDING
Ring Interface # 2 Priority........... 10
Ring Interface # 2 Priority Rank...... 0
Data Vlans............................ 6, 20
--- EPSR Domain Information ---
EPSR Domain Name...................... allied-2
EPSR Domain Node Type................. Transit
EPSR Domain State..................... LINKS-UP
MAC Address of Master Node............ 00:0C:25:00:05:33
EPSR Domain Status.................... Enabled
Control Vlan.......................... 300
Enhanced Recovery..................... ON
Ring Interface # 1.................... ETH:[9.2]
Physical State of Ring Interface # 1.. UP
Ring Interface # 1 Type............... DOWNSTREAM
Ring Interface # 1 State.............. PHYSICALLY FORWARDING
Ring Interface # 1 Priority........... 0
Ring Interface # 1 Priority Rank...... 0
Ring Interface # 2.................... ETH:[3.2]
Physical State of Ring Interface # 2.. UP
Ring Interface # 2 Type............... UPSTREAM
Ring Interface # 2 State.............. PHYSICALLY FORWARDING
Ring Interface # 2 Priority........... 11
Ring Interface # 2 Priority Rank...... 1
Data Vlans............................ 6, 20
4.6.14 EPSR and (R)STP Interaction
You can coordinate EPSR and (R)STP so that devices can take part in both EPSR and (R)STP. By data filling
certain parameters correctly, the blocking of links to remove loops is coordinated.
4-144
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Configuration Procedure for SuperLoop - Peer SuperLoop Domain
EPSR and (R)STP Interaction
Description