Allied Telesis SwitchBlade x3100 Series Manual page 902

EPSR Trace
DELETE TRACE EPSR
Syntax
DELETE TRACE EPSR [ ={ epsrdomain-list | ALL } ] [ MESSAGETYPE={
HEALTH | RINGUPFLUSH | RINGDOWNFLUSH | LINKDOWN | LINKFORWARD-
REQUEST | PERMISSIONLINKFORWARD | QUERYLINKSTATUS | ALL } ] [
INTERFACE={ type:id-range | id-range | ifname-list | ALL } ]
Delete the events which match the given filters. Not specifying MESSAGETYPE or
Description
INTERFACE will treat that parameter as a wildcard.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
DELETE TRACE EPSR ALLIED-2 MESSAGETYPE RINGUPFLUSH INTERFACE
ALL
8-30
Software Reference for SwitchBlade x3100 Series Switches (Alarms and Troubleshooting)
Option Description
EPSR epsrdomain-list - list of domain(s)
ALL - all domains
MESSAGE- Specifies the exact EPSR protocol message type to
TYPE trace. Refer to
(EPSR) and SuperLoop Prevention
these messagetypes.
HEALTH
RINGUPFLUSH
RINGDOWNFLUSH
LINKDOWN
LINKFORWARDREQUEST
PERMISSIONLINKFORWARD
QUERYLINKSTATUS
ALL - specifies to trace all messages
INTERFACE A logical representation of one or more physical ports;
type:id-range - the type of available ports, such as
ETH:7.0 or a range (ETH:8.0-8.9)
id-range - used with type (type:id) to query the physical
ports; the numerical identifier of the interface
ifname-list - list of interface names, if not numerical
ALL - all applicable interfaces
Ethernet Protection Switched Ring
for information on
IGMP Counters
Default Value