Add Sntp Server - Allied Telesis SwitchBlade x3100 Series Manual

Configuring SNTP

ADD SNTP SERVER

Syntax
ADD SNTP SERVER={ipaddress|hostname}
Inputs the hostname or IP address of the SNTP server that the SBx3112 will use. If an
Description
SNTP server is already specified, the command is rejected. To change the server, the
existing server must be deleted using the DELETE SNTP SERVER command.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
SERVER
Example
officer SEC>> add sntp server 192.43.244.18.
Info (010017): Operation Successful
officer SEC>> sh sntp
-------------------------------------------------------------------------------
SNTP Configuration
------------------------------------------------------------------------------
Status
Local IP
Last Update
Last Delta
Last Status
SNTP Server
------------------------------------------------------------------------------
192.43.244.18
SNTP Statistics
------------------------------------------------------------------------------
Requests Sent
Responses Received
----------------------------------------------------------------------
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Description
The hostname or IP address of the SNTP server
On
10.52.70.13
2009-11-07 11:02:22 DST
+00.00s
Unknown error
2
2
Introduction
Default Value
1-77