Allied Telesis SwitchBlade x3100 Series Manual page 684

Introduction
SHOW AUTHENTICATION COUNTER
Syntax
SHOW AUTHENTICATION COUNTER [INTERFACE={type:id-range|id-range|
ifname-list|ALL}] [SUPPLICANT=macaddress-list|ALL]
[TYPE={STATISTICS|DIAGNOSTICS|SESSIONSTATISTICS|ALL}] [FULL]
Displays the counters/statistics of the supplicants.
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
SHOW AUTHENTICATION COUNTER
--- Port Authentication Statistics Counters ---
ETH:6.22 : 00:09:41:58:E6:F2
---------------------------
EAPOL
EAP Resp/Id
--- Port Authentication Diagnostics Counters ---
ETH:6.22 : 00:09:41:58:E6:F2
---------------------------
6-124
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Option Description
INTERFACE The ethernet interfaces over which the Counters will be
shown.
SUPPLI- Specifies a supplicant's MAC address or ALL supplicants.
CANT
TYPE The type of counters/statistics
STATISTICS -
DIAGNOSTICS -
SESSIONSTATISTICS -
ALL
FULL Display more descriptive information
Rx Tx
2 19
Response Req/Id Tx
0 2
Configuring Port Authentication
Start Logoff
0 0
Req Tx
0 19
Default Value
ALL
ALL
ALL
Abbreviated
Invalid
0
LenErr
0