Allied Telesis SwitchBlade x3100 Series Manual page 678

Introduction
SET AUTHENTICATION INTERFACE
Syntax
SET AUTHENTICATION INTERFACE={type:id-range|id-range| ifname-
list|ALL} [PORTCONTROL={AUTO|AUTHORIZED|UNAUTHORIZED}] [REAUTHEN-
ABLED={ON|OFF}] [REAUTHPERIOD={1..2147483647}] [QUIETPE-
RIOD=1..65535] [SERVERTIMEOUT=1..65535]
[SUPPLICANTTIMEOUT=1..65535]
This commands sets various configurable Port Authentication settings for the interface.
Description
Note that when one or of these parameters are set back to defaults on an interface,
authorizattion on the interface will drop, and any supplicants on the interface must re-
authenticate.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
SET AUTHENTICATION INTERFACE
6-118
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Option Description
INTERFACE The ethernet interface over which the Port Authentica-
tion settings will be changed
PORTCON- The authorization state of the port
TROL
AUTO - Allow a port client to negotiate authentication.
This allows authentication to occur on the interface.
AUTHORIZED - The port is always in an authorized
state; authorization always succeeds.
UNAUTHORIZED - The port is always in an unautho-
rized state; authorization always fails.
REAUTHEN- If set to ON, the reauthentication timer (REAUTHPE-
ABLED RIOD) is activated.
REAUTHPE- The number of seconds that elapse before the suppli-
RIOD cant is asked to reauthenticate
QUIETPE- The number of seconds, after a failed authentication,
RIOD that must elapse before another request can occur
SERVERTIME- The number of seconds to wait for a response from a
OUT RADIUS server before a time-out is declared.
SUPPLI- The number of seconds to wait for a response from a
CANTTIME- supplicant before a time-out is declared.
OUT
Configuring Port Authentication
=6.22-6.23
REAUTHPERIOD
Default Value
=1800