mpls ldp graceful-restart timers max-recovery
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mpls ldp graceful-restart timers max-recovery seconds
no mpls ldp graceful-restart timers max-recovery
Command introduced in JunosE Release 7.1.0.
Specifies the maximum length of time that the router waits for its neighbor to complete
a graceful LDP restart after the LDP session is reestablished. The no version restores the
default value, 120 seconds.
seconds—Number of seconds in the range 15–600
Global Configuration
Chapter 13: M Commands
1351