Mpls Ldp Graceful-Restart Timers Max-Recovery - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

mpls ldp graceful-restart timers max-recovery

mpls ldp graceful-restart timers max-recovery seconds
Syntax
no mpls ldp graceful-restart timers max-recovery
Command introduced in JUNOSe Release 7.1.0.
Release Information
Specifies the maximum length of time that the router waits for its neighbor to
Description
complete a graceful LDP restart after the LDP session is reestablished. The no version
restores the default value, 120 seconds.
Options
Global Configuration
Mode
1342
mpls ldp graceful-restart timers max-recovery
seconds Number of seconds in the range 15–600