Display Ip Routing-Table Protocol - 3Com 5500-EI PWR Reference Manual

verbose: With this keyword specified, detailed information of routes in the active or inactive state that
match the IP prefix list is displayed. With this keyword not specified, brief information of only the routes
in the active state that match the prefix list is displayed.
Description
Use the display ip routing-table ip-prefix command to display the information of routes matching the
specified IP prefix list.
Examples
# Display the brief information of routes in the active state that match the prefix list abc2.
<Sysname>system-view
System View: return to User View with Ctrl+Z.
[Sysname] ip ip-prefix abc2 permit 10.1.1.0 24 less-equal 32
[Sysname] display ip routing-table ip-prefix abc2
Routes matched by ip-prefix abc2:
Summary count: 2
Destination/Mask
10.1.1.0/24
10.1.1.2/32
For descriptions of the above fields, see
# Display the detailed information of routes in the active or inactive state that match the prefix list abc2.
[Sysname] display ip routing-table ip-prefix abc2 verbose
Routes matched by ip-prefix abc2:
+ = Active Route, - = Last Active, # = Both
Summary count: 2
**Destination: 10.1.1.0
Protocol: #DIRECT
*NextHop: 10.1.1.2
State: <Int ActiveU Retain Unicast>
Age: 3:23:44
**Destination: 10.1.1.2
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 3:23:44
For descriptions of the above fields, see

display ip routing-table protocol

Syntax
display ip routing-table protocol protocol [ inactive | verbose ]
View
Any view
Protocol Pre Cost
DIRECT 0 0
DIRECT 0 0
Table
Mask: 255.255.255.0
Preference: 0
Interface: 10.1.1.2(Vlan-interface1)
Cost: 0/0
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Cost: 0/0
Table
Nexthop Interface
10.1.1.2
127.0.0.1 InLoopBack0
1-1.
* = Next hop in use
1-2.
1-8
Vlan-interface1