Reset Udp Statistics; Tcp Timer Fin-Timeout - 3Com 8807 Command Reference Manual

IP Performance Configuration Commands 117
Example
# Clear the TCP statistics information.
<SW8800> reset tcp statistics

reset udp statistics

Syntax
reset udp statistics
View
User view
Parameter
None
Description
Use the reset udp statistics command to can clear the UDP statistics information.
Example
# Clear the UDP traffic statistics information.
<SW8800> reset udp statistics

tcp timer fin-timeout

Syntax
tcp timer fin-timeout time-value
undo tcp timer fin-timeout
View
System view
Parameter
time-value: TCP finwait timer value in second, with the value ranging from 76 to
3600; By default, it is 675 seconds.
Description
Use the tcp timer fin-timeout command to configure the TCP finwait timer.
Use the undo tcp timer fin-timeout command to restore the default value of the
TCP finwait timer.
When the TCP connection state changes from FIN_WAIT_1 to FIN_WAIT_2, the
finwait timer is enabled. If the switch does not receive FIN packets before the
finwait timer times out, the TCP connection is terminated.
Related command: tcp timer syn-timeout, tcp window.
Example
# Configure the TCP finwait timer value as 800 seconds.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] tcp timer fin-timeout 800