Display Time-Range - 3Com S7906E Command Reference Manual

Field
Remaining

display time-range

Syntax
display time-range { time-range-name | all }
View
Any view
Default Level
1: Monitor level
Parameters
time-range-name: Time range name comprising 1 to 32 characters. It is case insensitive and must start
with an English letter. To avoid confusion, this name cannot be all.
all: All existing time ranges.
Description
Use the display time-range command to display the configuration and state of a specified or all time
ranges.
A time range is active if the system time falls into its range, and if otherwise, inactive.
Examples
# Display the configuration and state of time range trname.
<Sysname> display time-range trname
Current time is 22:20:18 1/5/2006 Thursday
Time-range : trname ( Inactive )
from 15:00 1/28/2006 to 15:00 1/28/2008
Table 1-2 Description on the fields of the display time-range command
Field
Current time
Time-range
time-range
Syntax
time-range time-range-name { start-time to end-time days [ from time1 date1 ] [ to time2 date2 ] | from
time1 date1 [ to time2 date2 ] | to time2 date2 }
Number of remaining ACLs
Current system time
The configuration and state of time range, such as time range name, its
activated state, and start time and ending time.
1-3
Description
Description