Table of Contents
Advertisement
• Record wake-up calls in the call database: Wake-up calls to internal subscribers (see
Functions > Wake-up times)
• Special dial tone if use of the call data memory has reached: To be notified about this
situation a special dial tone can be heard on certain telephones (configured under
subscriber profiles or subscriber features Signallisation by tones) at a certain filling grade
of the memory. The filling grade of the memory that triggers the special dial tone can be
configured in percent here.
• Overwrite the memory automatically: In case of a filled call data memory the recording
of further calls can be enabled by allowing to overwrite the memory automatically.
Proceed as follows:
• Using the configuration manager
1. Open the page User data > Call data > Settings.
2. Select or clear the check box for the call type (Recording outgoing calls, Recording
incoming calls, Recording wake-up calls) under CALL CHARGE DATE
MANAGEMENT.
3. If necessary, select or clear the corresponding check box for the sub-selection:
Configuring a Currency Name
The currency name indicates which abbreviation is used for the currency in the configuration
manager (e.g., "EUR" for Euros).
Proceed as follows:
• Using the configuration manager
1. Open the page Functions > Call allowance accounts.
2. Enter the desired abbreviation in the Currency name entry field.
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Address Books and Lists
Call Data
Configuring a Currency Name
221
Advertisement
Table of Contents
