Rocker Arm Oil Control Valve Removal/Installation - Honda Accord 2008 Manual

07/11/02 09:17:04 61TA0000_110_0327

Rocker Arm Oil Control Valve Removal/Installation

All models expect PZEV
1. Remove the strut brace (see page 20-287).
2. Disconnect the rocker arm oil control solenoid
connector (A) and the rocker arm oil pressure
switch connector (B).
＊０１
B
C
D
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
3. Remove the harness clamps (C) and the bolts (D).
4. Remove the rocker arm oil control valve assembly
(E) and the rocker arm oil control valve filter (F).
E
5. Remove the engine wire harness bracket (A) (also
(B) (if equipped)) from the rocker arm oil control
valve (C).
A
A
C
B
F
6. Install the parts in the reverse order of removal
with a new rocker arm oil control valve filter.
ＴＡ０８ＡＥＩＡ１４６８０３５１５１９ＫＤＡＴ００
＊０２
C
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
11-327