Subaru LEGACY 2006 Manual page 3730

asieps_tobira.book 56 ページ ２００９年１０月２６日 月曜日 午前９時１６分
MANUAL TRANSMISSION AND DIFFERENTIAL
F: ADJUSTMENT
Selection of main shaft rear plate:
Using the ST, measure the protrusion amount (A)
of ball bearing from transmission main case sur-
face, and select a suitable plate in the following ta-
ble.
NOTE:
Before measuring, tap the end of main shaft with a
plastic hammer lightly in order to make the clear-
ance zero between the main case surface and
moving flange of bearing.
ST 498147001 DEPTH GAUGE
Dimension (A)
Part number
mm (in)
4.00 — 4.13
32294AA041
(0.1575 — 0.1626)
3.87 — 3.99
32294AA051
(0.1524 — 0.1571)
Main Shaft Assembly for Single-range
Mark
1
2
(A)
MT-00209
5MT-56