Subaru LEGACY 2006 Manual page 4036

bp06usen601.fm 32 ページ ２０１０年５月２７日 木曜日 午後３時６分
POWER ASSISTED SYSTEM (POWER STEERING)
5) Using the ST and a press, install the oil seal and
bushing in valve housing.
ST 34199AG090 INSTALLER & REMOVER
(1) Bushing
(2) Oil seal
6) Apply vinyl tape to the groove of pinion.
7) Install the back-up ring and oil seal to pinion, and
then remove the vinyl tape.
(1)
(1) Oil seal
(2) Vinyl tape
(3) Back-up ring
8) Attach the ST to pinion, and install the seal ring.
ST 34199AG020 GUIDE
ST
(1) Seal ring
Steering Gearbox
ST
(1)
(2)
PS-00856
(3)
(2)
PS-00528
(1)
PS-00529
PS-32
9) Remove the ST GUIDE, and form the seal ring
properly using ST FORMER.
ST 34199AG070 FORMER
ST
(1) Seal ring
10) Put vinyl tape around pinion shaft spline to pro-
tect oil seal from damage.
11) Install the valve to pinion, and install the snap
ring.
(1)
(1) Snap ring
(2) Valve
12) Attach the pinion and valve assembly into the
valve housing.
(1)
(1) Valve housing
(2) Pinion & valve ASSY
(1)
PS-00530
(2)
PS-00531
(2)
PS-00532