Subaru LEGACY 2006 Manual page 3718

asieps_tobira.book 42 ページ ２００９年１０月２６日 月曜日 午前９時１６分
MANUAL TRANSMISSION AND DIFFERENTIAL
11.Transfer Driven Gear
A: REMOVAL
1) Remove the manual transmission assembly
from the vehicle. <Ref. to 5MT-24, REMOVAL,
Manual Transmission Assembly.>
2) Remove the back-up light switch and neutral po-
sition switch. <Ref. to 5MT-33, REMOVAL, Switch-
es and Harness.>
3) Remove the transfer case together with the ex-
tension case assembly. <Ref. to 5MT-36, REMOV-
AL, Transfer Case
Assembly.>
4) Remove the extension case assembly.
5) Remove the transfer driven gear.
6) Remove bearing outer races from the extension
case and transfer case.
(A) Bearing outer race (Transfer case side)
(B) Bearing outer race (Extension case side)
Transfer Driven Gear
and Extension Case
MT-00118
(A)
(B)
MT-00140
5MT-42
B: INSTALLATION
1) Install the bearing outer races to extension case
and transfer case.
(C)
(B)
(A) Bearing outer race
(B) Bearing outer race
(C) Transfer case
(D) Extension case
2) Install the transfer driven gear.
3) Install the transfer case and the extension case
assembly. <Ref. to 5MT-36, INSTALLATION,
Transfer Case and Extension Case Assembly.>
4) Install the back-up light switch and the neutral
position switch. <Ref. to 5MT-33, INSTALLATION,
Switches and Harness.>
5) Install the manual transmission assembly to the
vehicle. <Ref. to 5MT-26, INSTALLATION, Manual
Transmission Assembly.>
(A)
(D)
MT-00141
MT-00118