Subaru LEGACY 2006 Manual page 4024

asieps_tobira.book 20 ページ ２００９年１０月２６日 月曜日 午前９時１６分
POWER ASSISTED SYSTEM (POWER STEERING)
11) Disconnect the pipe C from pressure hose first,
then disconnect pipe D from the return hose.
(1) Pipe C
(2) Pipe D
(3) Pressure hose
(4) Return hose
12) Remove the clamp bolts securing the gearbox
to the crossmember, and remove the clamp.
(1) Clamp
Steering Gearbox
(4)
(3)
(2)
(1)
PS-00538
(1)
PS-00554
PS-20
13) Remove the bolts which secure the gearbox
bracket, and remove the bracket and gearbox.
(1) Bracket
B: INSTALLATION
1) Insert the gearbox into crossmember, being
careful not to damage gearbox boot.
2) Install the gearbox and bracket. Temporarily
tighten the bolts.
(1) Bracket
3) Insert bolts through the clamp to temporarily
tighten the gearbox to the crossmember bracket.
(1) Clamp
4) Tighten the bolts temporarily holding the gear-
box clamp and bracket together to the specified
torque.
Tightening torque:
60 N·m (6.1 kgf-m, 44.1 ft-lb)
(1)
PS-00555
(1)
PS-00555
(1)
PS-00554