Subaru LEGACY 2006 Manual page 3741

asieps_tobira.book 3 ページ ２００９年１０月２６日 月曜日 午前９時１６分
4. DRIVE PINION ASSEMBLY
Preload adjustment of thrust bearing
Starting torque:
0.3 — 0.8 N·m (0.03 — 0.08 kgf-m, 0.2 — 0.6 ft-
lb)
Adjusting washer No. 1
Part number
803025051
803025052
803025053
803025054
803025055
803025056
803025057
Adjusting washer No. 2
Part number
803025059
803025054
803025058
5. REVERSE IDLER GEAR
Adjustment of reverse idler gear position
Reverse idler gear to transmission case (LH)
wall clearance:
6.0 — 7.5 mm (0.236 — 0.295 in)
Reverse shifter lever
Part number Mark
32820AA070 7
32820AA080 8
32820AA090 9
After installing a suitable reverse shifter lever, ad-
just the clearance using washers.
Reverse idler gear to transmission case wall
clearance:
0 — 0.5 mm (0 — 0.020 in)
Washer (20.5 × 26 × t)
Thickness
Part number
mm (in)
803020151 0.4 (0.016)
803020152 1.1 (0.043)
803020153 1.5 (0.059)
General Description
Thickness mm (in)
3.925 (0.1545)
3.950 (0.1555)
3.975 (0.1565)
4.000 (0.1575)
4.025 (0.1585)
4.050 (0.1594)
4.075 (0.1604)
Thickness mm (in)
3.850 (0.1516)
4.000 (0.1575)
4.150 (0.1634)
Remarks
Further from case wall
Standard
Closer to the case wall
Thickness
Part number
mm (in)
803020154 1.9 (0.075)
803020155 2.3 (0.091)
— —
5MT-3
MANUAL TRANSMISSION AND DIFFERENTIAL
6. SHIFTER FORK AND ROD
Select a suitable shifter fork so that both the cou-
pling sleeve and reverse driven gear are positioned
in the center of their synchromesh mechanisms.
Rod end clearance:
A: 3rd-4th — 5th
0.5 — 1.3 mm (0.020 — 0.051 in)
B: 1st-2nd — 3rd-4th
0.4 — 1.4 mm (0.016 — 0.055 in)
1st-2nd shifter fork
Part number Mark
32804AA060 1
32804AA070 No mark
32804AA080 3
3rd-4th shifter fork
Part number Mark
32810AA061 1
32810AA071 No mark
32810AA101 3
5th shifter fork (Non-turbo model)
Part number Mark
32812AA201 7
32812AA211 No mark
32812AA221 9
5th shifter fork (Turbo model)
Part number Mark
32812AA231 7
32812AA241 No mark
32812AA251 9
Remarks
Approaches 1st gear
by 0.2 mm (0.008 in).
Standard
Approaches 2nd gear
by 0.2 mm (0.008 in)
Remarks
Approaches 4th gear
by 0.2 mm (0.008 in).
Standard
Approaches 3rd gear
by 0.2 mm (0.008 in)
Remarks
Approaches 5th gear
by 0.2 mm (0.008 in).
Standard
Moves away from 5th
gear by 0.2 mm (0.008
in).
Remarks
Approaches 5th gear
by 0.2 mm (0.008 in).
Standard
Moves away from 5th
gear by 0.2 mm (0.008
in).