Subaru LEGACY 2006 Manual page 4077

asieps_tobira.book 2 ページ ２００９年１０月２６日 月曜日 午前９時１６分
REAR SUSPENSION
1. General Description
A: SPECIFICATION
Model
Wheel arch height
+12 mm
[Tolerance: (
–24 mm
Camber
(Tolerance: ±0°45' Difference between RH and LH:
45' or less)
Toe-in
Thrust angle (Tolerance: ±0°30')
Diameter of stabilizer
NOTE:
• Front and rear toe-in and front camber can be adjusted. Adjust if the toe-in or camber tolerance exceeds
specifications.
• Other items indicated in the specifications table cannot be adjusted. If other items exceed specifications,
check suspension parts and connections for deformation, and replace with new parts as required.
(1) Front
A – B = Positive: Toe-in, Negative: Toe-out
α = Individual toe angles
General Description
2.5 i
mm (in) 365 (14.4)
+0.47 in
)]
–0.94 in
mm (in)
mm (in) 15 (0.59)
B
(1)
A
FS-00001
RS-2
Sedan
2.5 GT OUTBACK 2.5 i
438 (17.2)
–0°40' –0°10'
0±3 (0±0.12) Toe angle (sum of both wheels): 0°±0°15'
0°
16 (0.63) 15 (0.59) 15 (0.59)
Wagon
2.5 GT OUTBACK
375 (14.8) 438 (17.2)
–0°30' –0°10'
16 (0.63) 15 (0.59)