Subaru LEGACY 2006 Manual page 3232

asieps_tobira.book 77 ページ ２００９年１０月２６日 月曜日 午前９時１６分
C: DISASSEMBLY
1) Remove the snap ring from reduction driven
gear.
(A)
(A) Snap ring
2) Remove the ball bearing from reduction driven
gear using ST.
ST 498077600 REMOVER
(A)
(A) Ball bearing
3) Remove the snap ring from reduction driven
gear.
Reduction Driven Gear
D: ASSEMBLY
1) Install the snap ring to reduction driven gear.
2) Install the new ball bearing to reduction driven
gear using press.
AT-00156
3) Install the snap ring to reduction driven gear.
ST
AT-00157
E: INSPECTION
Make sure the ball bearing and gear is not de-
formed or damaged.
4AT-77
AUTOMATIC TRANSMISSION
(A)
(A) Ball bearing
(A)
(A) Snap ring
AT-00158
AT-00156