Subaru LEGACY 2006 Manual page 4019

asieps_tobira.book 49 ページ ２００９年１０月２６日 月曜日 午前９時１６分
2) Tighten the bolt which attaches the power steer-
ing pump bracket.
Tightening torque:
<Ref. to PS-7, OIL PUMP, COMPONENT, Gen-
eral Description.>
3) Connect the pressure hose and suction hose
each other.
Tightening torque:
Eye bolt
40 N·m (4.1 kgf-m, 29.5 ft-lb)
CAUTION:
Be careful when installing; If the hose is twisted
it may come into contact with other parts.
(1)
(2)
(1) Suction hose
(2) Pressure hose
4) Connect the power steering pressure switch
connector.
5) Install the tensioner adjuster.
6) Install the V-belts.
7) Install the cover of the pulley belt.
8) Connect the ground cable to the battery.
9) Pour the specified power steering fluid. <Ref. to
PS-54, Power Steering Fluid.>
CAUTION:
Never start the engine before filling with fluid;
otherwise the vane pump may become seized.
Oil Pump
POWER ASSISTED SYSTEM (POWER STEERING)
PS-00701
PS-00700
PS-49