asieps_tobira.book 62 ページ 2009年10月26日 月曜日 午前9時16分
AUTOMATIC TRANSMISSION
21.Transmission Control Module
(TCM)
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the instrument panel lower cover and
remove the connector.
3) Disconnect the connector from TCM.
(A)
(A) Transmission control module (TCM)
(B) Brake pedal
4) Remove the TCM.
B: INSTALLATION
1) Install the TCM.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
(A)
(A) Transmission control module (TCM)
(B) Brake pedal
2) Connect the connector to TCM.
3) Install in the reverse order of removal.
4) Execute the learning control promotion. <Ref. to
4AT(diag)-16, FACILITATION OF LEARNING
CONTROL, OPERATION, Subaru Select Moni-
tor.>
Transmission Control Module (TCM)
(B)
AT-02170
(B)
AT-02170
4AT-62