Subaru LEGACY 2006 Manual page 3870

asieps_tobira.book 51 ページ ２００９年１０月２６日 月曜日 午前９時１６分
4) Remove the lock plate RH and LH.
5) Remove the holder RH and LH with ST.
ST 18630AA010 WRENCH
ST
6) Pull out the differential case assembly from dif-
ferential carrier.
NOTE:
Be careful so that the teeth do not hit against the
case.
Rear Differential (VA-type)
7) Remove the bearing race from holder RH and
LH with ST and the press.
ST 18758AA000 PULLER
NOTE:
• Make sure the bolt of puller turn manually.
• Set the puller so that its claws catch the groove of
holder.
DI-00364
DI-00365
8) Remove the oil seal from holder RH and LH us-
ing screwdriver.
NOTE:
Perform this operation only when changing oil seal.
DI-00366
DI-51
DIFFERENTIALS
ST
(A) Groove
(B) Claw
(A) Holder
ST
(A)
(B)
DI-00367
(A)
ST
DI-00368
DI-00369