Subaru LEGACY 2006 Manual page 4027

bp06usen601.fm 23 ページ ２０１０年５月２７日 木曜日 午後３時６分
7) Tighten the adjusting screw until it can no longer
be tightened.
(1) Adjusting screw
8) Using the ST, remove the tie-rod.
ST 926230000 SPANNER
9) Loosen the adjusting screw, and remove the
spring and sleeve.
10) Remove the two bolts securing valve assem-
bly.
11) Carefully draw out the input shaft and remove
the valve assembly.
Steering Gearbox
POWER ASSISTED SYSTEM (POWER STEERING)
12) Using a drill, release the crimping of holder.
CAUTION:
Make a hole of 2 mm (0.08 in) depth using a drill
with 3 mm (0.12 in) diameter.
(1)
PS-00495
13) Remove the holder.
(1) Holder
14) Attach the ST to the pinion housing side of the
rack and push out the rack along with the outer side
PS-00116
oil seal.
ST 34199FE000 INSTALLER & REMOVER
PS-00117
PS-23
PS-00516
(1)
PS-00512