Subaru LEGACY 2006 Manual page 3234

asieps_tobira.book 51 ページ ２００９年１０月２６日 月曜日 午前９時１６分
19) Disconnect the connector from the rear vehicle
speed sensor.
(A) Rear vehicle speed sensor
20) Remove the oil pan.
21) Disconnect the harness connector and trans-
mission ground terminal.
(B)
(A) Transmission ground
(B) Harness connector
22) Remove the harness assembly.
Front Vehicle Speed Sensor
(A)
AT-02207
(A)
AT-00050
4AT-51
AUTOMATIC TRANSMISSION
B: INSTALLATION
1) Pass the harness assembly through the hole in
transmission case.
2) Connect the harness connector and transmis-
sion ground.
Tightening torque:
8 N·m (0.8 kgf-m, 5.8 ft-lb)
(A)
(B)
(A) Transmission ground
(B) Harness connector
3) Apply proper amount of liquid gasket to the en-
tire oil pan mating surface.
Liquid gasket:
THREE BOND 1217B (Part No. K0877YA020)
AT-00048
AT-00050
AT-02742