Subaru LEGACY 2006 Manual page 3996

asieps_tobira.book 4 ページ ２００９年１０月２６日 月曜日 午前９時１６分
FRONT SUSPENSION
C: CAUTION
• Wear appropriate work clothing, including a cap,
protective goggles and protective shoes when per-
forming any work.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Use SUBARU genuine grease etc. or equivalent.
Do not mix grease etc. of different grades or man-
ufacturers.
• Before securing a part on a vise, place cushion-
ing material such as wood blocks, aluminum plate,
or cloth between the part and the vise.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
D: PREPARATION TOOL
1. SPECIAL TOOL
ILLUSTRATION
ST-927680000
ST20299AG000
ST20299AG010
General Description
TOOL NUMBER DESCRIPTION
927680000 INSTALLER &
REMOVER SET
20299AG000 REMOVER
20299AG010 BASE
FS-4
REMARKS
Used for replacing front arm front bushing.
Used for replacing front arm rear bushing.
Used with BASE (20999AG010).
Used for replacing front arm rear bushing.
Used with REMOVER (20999AG000).