Subaru LEGACY 2006 Manual page 3280

asieps_tobira.book 36 ページ ２００９年１０月２６日 月曜日 午前９時１６分
AUTOMATIC TRANSMISSION
15) Remove the engine harness bracket.
16) Remove the pitching stopper bracket.
17) Set the ST.
ST 41099AC000 ENGINE SUPPORT ASSY
ST
18) Remove the bolts which hold the upper side of
the transmission to the engine.
19) Lift-up the vehicle.
20) Remove the under cover.
21) Remove the front, center and rear exhaust
pipes and the muffler.
<Ref. to EX(H4SO)-4, REMOVAL, Front Exhaust
Pipe.> <Ref. to EX(H4SO)-8, REMOVAL, Rear Ex-
haust Pipe.> <Ref. to EX(H4SO)-10, REMOVAL,
Muffler.>
Automatic Transmission Assembly
22) Remove the heat shield cover.
AT-02815
23) Remove the ATF drain plug to drain ATF.
AT-02167
24) Disconnect the ATF cooler hoses from the
pipes of the transmission side, and remove the oil
charge pipe.
AT-00106
25) Remove the propeller shaft.
<Ref. to DS-10, REMOVAL, Propeller Shaft.>
26) Remove the shift select cable.
<Ref. to CS-23, REMOVAL, Select Cable.>
27) Remove the brackets (two) which hold front
stabilizer.
4AT-36
(B)
(A) Oil pan
(B) ATF drain plug
AT-01331
(A)
AT-01332
AT-01333