Subaru LEGACY 2006 Manual page 3270

asieps_tobira.book 121 ページ ２００９年１０月２６日 月曜日 午前９時１６分
3) Set the inner race. Make sure that the clutch
locks in the clockwise direction and rotates freely in
the counterclockwise direction.
(A)
(A) Locked
(B) Free
E: INSPECTION
1. HIGH CLUTCH AND REVERSE CLUTCH
Check the following items.
• Drive plate facing for wear or damage
• Driven plate for discoloration (burned color)
• Snap ring wear, return spring setting and break-
age, and snap ring retainer deformation
• Lip seal and D-ring damage
• Piston and drum check ball operation
• Adjust the total end play. <Ref. to 4AT-87, AD-
JUSTMENT, Oil Pump Housing.>
2. PLANETARY GEAR AND LOW CLUTCH
Check the following items.
• Drive plate facing for wear or damage
• Driven plate for discoloration (burned color)
• Snap ring wear, return spring setting and break-
age, and spring retainer deformation
• Lip seal and D-ring damage
• Piston check ball operation
• Measure the total end play and adjust it to be
within specifications. <Ref. to 4AT-87, ADJUST-
MENT, Oil Pump Housing.>
3. 2-4 BRAKE
Check the following items.
• Drive plate facing for wear or damage
• Driven plate for discoloration (burned color)
• Snap ring wear and spring retainer deformation
• Lip seal and D-ring damage
• Measure the total end play and adjust it to be
within specifications. <Ref. to 4AT-87, ADJUST-
MENT, Oil Pump Housing.>
AT Main Case
4. ONE-WAY CLUTCH
• Check that the snap ring is not damaged and the
seal ring is not deformed.
• Measure the total end play and adjust it to be
within specifications. <Ref. to 4AT-87, ADJUST-
MENT, Oil Pump Housing.>
5. LOW & REVERSE BRAKE
(B)
Check the following items.
• Drive plate facing for wear or damage
• Driven plate for discoloration (burned color)
• Snap ring wear and spring retainer deformation
AT-00282
4AT-121
AUTOMATIC TRANSMISSION